01 / EARLY DESIGN1
Early Design / Need DFM
Review part geometry, resin, wall thickness, draft, gating, cooling, appearance, assembly, and open risks before tooling decisions are fixed.
DFM and manufacturability review
Injection Mold Engineering & Molding Solutions
From Early DFM to Tooling, T0/T1, and Production Support
Jeancen supports overseas product teams with DFM review, injection mold design and build, trial correction, dimensional verification, and plastic injection molding and production support based on project requirements.
Start with Your Current Project Stage
What Does Your Project Need Now?
Choose the stage that matches the engineering decision in front of you. Jeancen can review the available information and confirm the next practical step.
02 / NEW TOOLING2
Ready for Tooling
Connect the tooling concept, mold design review, build, trial requirements, correction, and validation plan.
Mold design and manufacturing
03 / TRIAL OR TRANSFER3
T0/T1 or Existing Mold Issue
Structure the review around defects, fit, assembly, dimensional deviation, correction, transfer, and revalidation.
Trial issue and corrective action
04 / PRODUCTION4
Injection Molding / Production
Confirm material, process, inspection, packaging, and production handover requirements after validation.
Pilot and production support
Core Solution Paths
Engineering Decisions, Not Product Categories
Each solution path is organized around the project question a buyer needs to solve, from early design review to tooling validation and production support.
01 / ENGINEERING1
Engineering & DFM
Review manufacturability, material, part geometry, tooling approach, assembly requirements, and open risks before steel cutting.
Early risk review
02 / TOOLING2
Mold Design & Manufacturing
Connect tooling concept, mold design, manufacturing, trial feedback, correction, and revalidation.
Tooling from concept to trials
03 / VALIDATION3
Prototype Tooling & T0/T1 Validation
Use controlled sampling and iteration to answer fit, function, appearance, and assembly questions before production.
Sampling and learning cycle
04 / INSERT PROCESS4
Insert Molding & Overmolding
Review insert location, protection, flow-related shift risk, interface fit, and validation needs for suitable parts.
Positioning and interface control
05 / MEASUREMENT5
Measurement & Dimensional Validation
Use sample inspection and representative dimensional comparison data to support root-cause review and corrective decisions.
Evidence for correction decisions
06 / MOLDING6
Plastic Injection Molding & Production Support
Carry approved material, process, inspection, packaging, and handover requirements into pilot or suitable production projects.
Pilot and production handover
Engineering Evidence
Show How Engineering Decisions Are Checked
Use clear, public-approved evidence to connect DFM review, mold structure, trial feedback, measurement, correction, and production handover.
The goal is not to display a long catalog. It is to help buyers understand how a tooling or molding decision is reviewed, what evidence is available, and what must be validated before the next project stage.
Project Delivery
A Controlled Route from CAD to Stable Production
Engineering decisions, trial results, and open risks stay visible before the project moves forward.
- 01
- Project Input & DFM
- Confirm part data, resin, volume, tolerances, appearance, assembly, and open risks.
- 02
- Mold Design & Build
- Review the tooling concept and mold design before build decisions move into steel.
- 03
- T0/T1 & Correction
- Use samples, measurements, defect review, correction, and revalidation before approval.
- 04
- Pilot & Production Support
- Carry approved process and quality requirements into pilot runs and production handover.
Start a Molding Project
Send Part Data for an Engineering Review
Share your 3D model or 2D drawing, resin, expected volume, key tolerances, appearance or assembly needs, and the current project stage.
Email
info@jeancen.com
Phone / WhatsApp
+86 187 5090 9501
Xiamen Office
No. 3-3, Fuming West Road, Tong'an District, Xiamen, Fujian, China
Project Response
Engineering review based on the information provided
Project Inquiry
Request a Project Review
Share your project stage, application, material, estimated volume, and key requirements. Add a secure file link or email info@jeancen.com. NDA is available before quotation.
What Happens After Submission
We review the information provided and confirm the appropriate next step based on the project scope and available data.
2K / Bi-Injection Molds
3 products
2K / Bi-Injection Molds
2K Tail Lamp Tooling | Clean Interface Lines | Jeancen Mold
Multi-shot tooling for lens + frame structures—engineered to control interface flash, alignment drift, and cosmetic consistency.
2K / Bi-Injection Molds
2K Light Bar Tooling | Alignment Stability | Jeancen Mold
Multi-shot tooling for long light-bar structures—engineered for repeatable indexing, controlled interface quality, and stable CTQ alignment.
2K / Bi-Injection Molds
2K Cosmetic Tooling | Fog Lamp Bezel Surface Control | Jeancen Mold
Cosmetic 2K tooling for lamp bezels and covers—focused on gloss/texture consistency, weld-line management, and minimal witness marks.